SawStop Jessem Master Lift 2 CNC Lift Plans
I have created these files to make cutting out the recesses etc for the Jessem Master lift 2 router lift, in a wooden saw stop table.
*** Please note, this is turned 90 degrees from the NORMAL orientation that people use, so please make sure thats what you want before you buy. You could also just rotate the vectors if you want it the other way, the dimensions will remain***
This will be the easiest way to cut in to your saw stop if you have a CNC, and if you are too nervous to take a hand router to your table top.
Total cut time is under an hour and comes out perfect every time.
A full PDF with instructions and parts list is included as well.
I WOULD however recommend getting a piece of 3/4" mdf and doing at least 1 test cut and fit prior to cutting in to your saw stop table, thats just the cautious guy in me.
You can see evidence in the picture above.
Thank you for looking, I hope you find value in this file.
I have created these files to make cutting out the recesses etc for the Jessem Master lift 2 router lift, in a wooden saw stop table.
*** Please note, this is turned 90 degrees from the NORMAL orientation that people use, so please make sure thats what you want before you buy. You could also just rotate the vectors if you want it the other way, the dimensions will remain***
This will be the easiest way to cut in to your saw stop if you have a CNC, and if you are too nervous to take a hand router to your table top.
Total cut time is under an hour and comes out perfect every time.
A full PDF with instructions and parts list is included as well.
I WOULD however recommend getting a piece of 3/4" mdf and doing at least 1 test cut and fit prior to cutting in to your saw stop table, thats just the cautious guy in me.
You can see evidence in the picture above.
Thank you for looking, I hope you find value in this file.
I have created these files to make cutting out the recesses etc for the Jessem Master lift 2 router lift, in a wooden saw stop table.
*** Please note, this is turned 90 degrees from the NORMAL orientation that people use, so please make sure thats what you want before you buy. You could also just rotate the vectors if you want it the other way, the dimensions will remain***
This will be the easiest way to cut in to your saw stop if you have a CNC, and if you are too nervous to take a hand router to your table top.
Total cut time is under an hour and comes out perfect every time.
A full PDF with instructions and parts list is included as well.
I WOULD however recommend getting a piece of 3/4" mdf and doing at least 1 test cut and fit prior to cutting in to your saw stop table, thats just the cautious guy in me.
You can see evidence in the picture above.
Thank you for looking, I hope you find value in this file.